. A. Seibert, . D. Staicu, C. D. Bottomley, . B. Boshoven, . H. Hein et al., Thermophysical properties of U, Zr-oxides as prototypic corium materials, Journal of Nuclear Materials, vol.520, pp.165-177, 2019.

R. C. Journeau, P. E. Piluso, and C. C. , Fukushima Daiichi ful debris simulant materials for the development of cutting and collection technologies, Journal of Nuclear Science and Technology, vol.55, issue.9, pp.985-995, 2018.

S. Mizokami, Current Status and Recent Investigation Results of Fukushima Daiichi, Severe Accident Research, 2019.

. M. Pellegrini, . K. Dolganov, .. L. Herranz, . H. Bonneville, . D. Luxat et al., Benchmark Study of the Accident at the Fukushima Daiichi NPS: Best-Estimate Case Comparison, Annals of Nuclear Technology, vol.196, issue.2, pp.198-210, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02559814

C. Chagnot, I. Doyen, A. Li-puma, C. Georges, E. Porcheron et al., Deep gouging : Development of deep blind kerf laser cutting technology for Fukushima fuel debris retrieval, DEM, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02415488

R. C. George, C. C. , J. C. , C. G. Blanchard, and P. E. , Benefits from developments in the field of Decommissioning for Controlled Laser Cutting Process, Proc WM2017 Conference, 2017.

, Air Quality -Particle size fractions definitions for health-related sampling, ISO Standard, vol.7708, 1995.

. G. Pilot, . S. Fauvel, .. X. Gosse, . G. De-dinechin, and . D. Vernhet, Measurement of secondary emissions during laser cutting of steel equipments, Nuclear Engineering and Design, vol.238, pp.2124-2134, 2008.

R. J. Dodds, Radionuclide distribution during ytterbium doped fibre laser cutting for nuclear decommissioning, Progress in Nuclear Energy, vol.118, p.103122, 2020.

C. N. Lee, .. S. Choi, .. B. Park, S. , and J. , Aerodynamic diameter and radioactivity distributions of radioactive aerosols from activated metals cutting for nuclear power plant decommissioning, Journal of Hazardous Materials, vol.369, pp.727-745, 2019.

. C. Journeau, T. J. Monerris, . L. Brissonneau, . E. Excoffier, C. V. Testud et al., Fabricating Fukushima Daiichi in-vessel and ex-vessel fuel debris simulants for the development and qualification of laser cutting technique, European Review Mtg on Severe Accident Research, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02418118

. K. Nishihara, . H. Iwamoto, and . K. Suyama, Estimation of fuel compositions in Fukushima Daiichi Nuclear Power Plant, JAEA Report JAEA Data, pp.2012-2030

G. Samsonov, The oxide handbook. IFI/PLENUM, 1973.

L. Capriotti, A. Quaini, R. Böhler, K. Boboridis, L. Luzzi et al., A laser heating study of CeO2 solid/liquid transition: challenges related to a refractory compound with a very high oxygen pressure, High Temperature High Pressure, vol.44, pp.69-82, 2014.

C. Jégou, E. Boccaccio, C. Journeau, P. Piluso, and J. Monerris, Induction Heating simulation of Residual power in the VULCANO facility, Proc. Int. Seminar Heating by Internal Sources, 2001.

. C. Journeau, . P. Piluso, .. J. Haquet, . E. Boccaccio, . V. Saldo et al., Two dimensional interactions of corium with concretes: The VULCANO VB Test series, Annals of Nuclear Energy, vol.36, pp.1597-1613, 2009.

V. Bouyer, C. Journeau, J. F. Haquet, P. Piluso, A. Nakayoshi et al., Large scale VULCANO Molten Core Concrete Interaction test considering

, European Review Meeting on Severe Accident Research, vol.9, 2019.

P. G. Ducros and . P. Malgouyres, Synthesis of the VERCORS experimental programme: Separate effect experiments on Fission Product Release, in support of the Phébus-FP program, Annals of Nuclear Energy, vol.61, pp.75-87, 2013.

.. C. Chagnot and C. G. De-dinechin, Cutting performance with new industrial continuous wave Nd : YAG highpower lasers : for dismantling of former nuclear workshops, the performances of recently introduced high power continuous wave Nd: YAG lasers are assessed, Nuclear Engineering and Design, vol.240, pp.2604-2613, 2010.

E. Porcheron, S. Peillon, T. Gelain, C. Chagnot, C. Journeau et al., Analysis of aerosol emission and dispersion during the laser cut-ting of Fukushima fuel debris simulants, ICONE, vol.26, 2018.

W. P. Baron, Aerosol measurement-Principles, 2001.

T. D. Brock, Membrane Filtration: A User's Guide Reference Manual, Science Tech, Inc, 1983.

.. Soo, L. K. Monaghan, and K. M. Harper, Air sampling filtration media: Collection efficiency for respirable size-selective sampling, Aerosol Science and Technology, vol.50, issue.1, pp.76-87, 2015.

. N. Zikova and ?. J. Ondrá?ek, Size-Resolved Penetration Through High-Efficiency Filter Media Typically Used for Aerosol Sampling, Aerosol Science and Technology, vol.49, pp.239-249, 2015.

Y. M. Chiari, C. G. Lucarelli, and C. J. , Comparison of PIXE and XRF analysis of airborne particulate matter samples collected on Teflon and quartz fiber filters, 2018.

.. S. Amanatidis, M. M. , and N. L. , Measuring number, mass, and size of exhaust particles with diffusion chargers: The dual Pegasor Particle Sensor, Journal of Aerosol Science, vol.92, pp.1-15, 2016.

A. A. Rostedt, J. K. Ojanper, .. , and K. J. , Characterization and Response Model of the PPS-M Aerosol Sensor, Aerosol Science and Technology, vol.48, pp.1022-1030, 2014.

. S. Bakardjieva, . M. Barrachin, . S. Bechta, . D. Bottomley, C. L. Brissonneau et al., Improvement of the European thermodynamic database NUCLEA, vol.52, pp.84-96, 2010.

C. Journeau, J. Zanini, E. Excoffier, V. Testud, E. Brackx et al., Aerosols released during the laser cutting of a Fukushima Daiichi debris simulant, European Review Meeting on Severe Accident Research, vol.9, 2019.
URL : https://hal.archives-ouvertes.fr/cea-02023046

. P. Piluso, J. J. Monerris, and C. G. , Thermophysical properties of liquid UO2, ZrO2 and corium by molecular dynamics and predictive models, International Journal of Thermophysics, vol.23, pp.1229-1240, 2002.

T. Gelain, C. Chagnot, E. Porcheron, and D. Roulet, CFD simulations of aerosol dispersion and agglomeration during the laser cutting of Fukushima fuel debris simulants, Proceedings of the 2018 26th International Conference on Nuclear Engineering ICONE26, 2018.

. S. Peillon, C. S. Fauvel, and G. F. , Aerosol Characterization and Particle Scrubbing Efficiency of Underwater Operations during Laser Cutting of Steel Components for Dismantling of Nuclear Facilities, Aerosol and Air Quality Research, vol.17, pp.1363-1373, 2017.

. K. Nishihara, . H. Iwamoto, and . K. Suyama, Estimation of fuel compositions in Fukushima Daiichi Nuclear Power Plant, JAEA Report JAEA Data, pp.2012-2030

R. Ruh, H. J. Garett, R. F. Domaglia, and N. M. Tallan, The system zirconia-hafnia, Journal of American Ceramic Society, vol.51, pp.23-27, 1968.